AUTOTERM Air 2D – 2 kW heater kit with installation kit
Item no. AUT-10010
Make cool evenings on board more comfortable with compact, fixed-installation heating.
- Heat without a shore-power connection: the heater uses diesel and a 12 or 24 V supply.
- Choose a controller to suit your use. Comfort Control offers thermostat control and timers when selected.
- Access manufacturer manuals and spare-parts information for installation and later servicing.
The 0.8–2.0 kW range must match the actual heat demand. Boat length alone is not enough.
Does this product suit your needs?
How to use the size guidance
This is SejlStrøm’s indicative first choice for normal insulation, not a manufacturer guarantee or a calculation for year-round use. The area is the interior space to be heated. Boat length is only a rough selection guide and cannot be converted directly into m². For frost, large glazed areas, several cabins or year-round living, I calculate the requirements for the specific installation.
AUTOTERM Air 2D – 2 kW heater kit with installation kit – reliable heating for boats, motorhomes and special-purpose vehicles
AUTOTERM Air 2D – 2 kW heater kit with installation kit is a compact air heater for anyone who wants reliable heating without shore power. The electronic control adjusts the output as required, and the model can run on diesel and HVO100.
What is included
Heater, fuel pump, wiring harness and standard installation parts. A control panel is included only in variants where it has been selected. Always check the specific variant before ordering.
Technical details
Your selected configuration: 12 V / Standard / Comfort Control
| Model | AUTOTERM Air 2D |
|---|---|
| Heat output | 0.8–2.0 kW |
| Warm-air flow | 34–86 m³/hour |
| Electrical power consumption while running | 10–29 W. Starting requires additional power; follow the manual. |
| Fuel consumption | 0.10–0.24 litres/hour |
| Voltage | 12 V |
| Casing / kit | Standard |
| Controller | Comfort Control |
| Fuel | Diesel EN590 or HVO100 EN15940, according to the manufacturer. |
| Standard heater dimensions | 310 × 119 × 145 mm. Check the installation dimensions for the Tight Space kit separately. |
| Heater unit weight | 2.9 kg, excluding the installation kit. |
| Operating altitude | Up to 4,200 m with the manufacturer’s altitude-compensating control unit. |
Size the heater according to heat loss, insulation and air distribution. A particular length in feet or area in m² does not guarantee sufficient heating.
Check compatibility and limitations
Check model, voltage and variant before ordering.
Selected, documented parts for this heater model. Accessories are optional; spare parts are for servicing. Check the package contents before buying additional parts.
The accessories list is a selection of compatible options, not a complete installation list. Brackets and housings are different mounting options; buy only the solution that suits the installation. Always check the package contents. Spare parts are for servicing.
This product has both Standard and Tight Space variants. New housings and mounting boxes are not generally matched to all these variants; the housing version must be confirmed first.
Installation and choosing accessories
Boat length alone does not determine the required size. Follow the manual for fuel, power, combustion air and a gas-tight exhaust routed outside.
🔧 Installation and compatibility
Size and route the power supply, fuel system, exhaust, combustion air and warm-air ducting in accordance with AUTOTERM’s manual. Marine installations require particular attention to through-hull fittings, exhaust slope, condensation and a safe distance from combustible materials.
💡 My advice before ordering
I recommend choosing the model according to the actual heat loss and the available installation space, rather than maximum output alone. Send the boat type, length, insulation details and a couple of photos of the installation area, and I will help you choose the right variant and the accessories you need.
Accessories compatible with AUTOTERM Air 2D
Selected, optional accessories. Check the contents of your selected variant and the requirements of your installation before ordering extra parts. This list is not a complete bill of materials for every boat or camper.
- AUTOTERM Bendable mounting bracket for Air 2D and Air 4D — adaptable mounting
- AUTOTERM External temperature sensor, 5 m, for AUTOTERM Air — temperature measurement with a 5 m cable
Spare parts for AUTOTERM Air 2D
For servicing and replacement – not mandatory extras for a new heater. This is a checked selection. Individual parts may already be included in a gasket set, so check before buying them all together.
View the selected spare parts for Air 2D
- AUTOTERM Gasket set for Air 2D
- AUTOTERM Glow plug screen for Air 2D and Air 4D
- AUTOTERM Ceramic temperature sensor gasket – Air 2D, 4D, 8D
- AUTOTERM Housing clips for Air 2D and Air 4D
- AUTOTERM Lower housing part for Air 2D
- AUTOTERM Upper housing part for Air 2D
- AUTOTERM Housing grille for Air 2D
- AUTOTERM Combustion chamber gasket for Air 2D
- AUTOTERM Combustion chamber screen for Air 2D
- AUTOTERM Glow plug sleeve for Air 2D
- AUTOTERM Glow plug sleeve gasket – Air 2D
- AUTOTERM Mounting seal for Air 2D
- AUTOTERM Temperature sensor washer – Air 2D, 4D, 8D
If the heater develops a fault, I can help identify the spare part using the model, serial number and symptoms. Parts restricted to particular serial numbers are not included as general extras.
Full product description
Select voltage and control panel
The kit includes the heater and standard installation parts. If you choose "Without panel," a control panel is not included. A compatible panel is required to operate the heater. If you choose a panel variant, the selected panel is included.
Hot air ducts, vents, and boat-specific installation parts are chosen based on the installation. See control panels and marine installation kits for Air 2D and Air 4D.
Quick selection – is this right for you?
Choose this if you want: a complete AUTOTERM Air 2D base solution for fixed installation and prefer documentation, spare parts, and a proven system.
- Type: complete heater kit for fixed installation
- Output: 2 kW class
- Voltage: select 12 or 24 V variant
- Good for: smaller boat, camper, or rooms with moderate heating needs
Before ordering: select the correct voltage and panel variant. Boat-specific hot air distribution, hull fittings, and other installation parts may still depend on your specific boat.
AUTOTERM Air 2D – 2 kW heater kit with installation kit – stable heat for boat, motorhome, and special vehicles
The AUTOTERM Air 2D – 2 kW heater kit with installation kit is a compact air heater for those who want reliable heat without shore power. The electronic control adjusts the output as needed, and the model can be used with diesel and HVO100.
Recommended sizing
Heated area: Up to 10 m²
Boat length: Up to 30 feet
This is SejlStrøm’s recommended first choice based on normal insulation, not a manufacturer’s warranty or a calculation for year-round use. The area refers to the interior space to be heated. The boat length is only a rough guide and cannot be converted directly to m². In case of frost, large glass areas, multiple cabins, or year-round living, I will calculate the requirement specifically.
⚡ Practical benefits
- 0.8–2.0 kW heat output with stepless regulation
- Low consumption and operation on 12 or 24 V depending on the variant
- Original AUTOTERM solution with access to spare parts and documentation
- Complete starting point for a new installation
⛵ Suitable for
- Motorhomes, campervans, vans, and cabs
- Smaller technical rooms, cabins, and mobile workspaces
📊 Specifications
| Heat output | 0.8–2.0 kW |
|---|---|
| Air volume | 34–86 m³/h |
| Fuel consumption | 0.10–0.24 l/h |
| Voltage | 12 V or 24 V – selected as a variant |
| Dimensions | 310 × 119 × 145 mm |
| Max. operating altitude | Up to 4,200 m with the manufacturer’s high-altitude controller |
📦 Package contents
Heater, fuel pump, wiring harness, and standard installation parts. Control panel is only included in variants where it has been selected. Always check the specific variant before ordering.
🔧 Installation and compatibility
Size the power supply, fuel system, exhaust, combustion air, and hot air ducting according to the AUTOTERM manual. Marine installations require special attention to hull fittings, exhaust slope, condensation, and safe distances from flammable materials.
📄 Manuals and documentation
- Official product information
- Official manual or document 1
- Official manual or document 2
- Official manual or document 3
- Official manual or document 4
💡 My advice before ordering
I recommend choosing a model based on actual heat loss and available installation space – not just on maximum output. Feel free to send details about your boat type, length, insulation, and a few pictures of the mounting area, and I will help you choose the right variant and necessary accessories.
Accessories compatible with AUTOTERM Air 2D
Selected optional accessories. Check the contents of the chosen variant and your installation needs before ordering extra parts. This list is not a complete bill of materials for every boat or camper.
- AUTOTERM Flexible mounting bracket for Air 2D and Air 4D — customized fastening
- AUTOTERM External temperature sensor, 5 m, for AUTOTERM Air — temperature measurement with 5 m cable
Spare parts for AUTOTERM Air 2D
For service and replacement – not mandatory purchases for a new heater. Here is a verified selection. Individual parts may already be included in a kit, so do not buy all parts indiscriminately.
See selected spare parts for Air 2D
- AUTOTERM Gasket set for Air 2D
- AUTOTERM Glow plug screen for Air 2D and Air 4D
- AUTOTERM Ceramic gasket for temperature sensor – Air 2D, 4D, 8D
- AUTOTERM Housing clips for Air 2D and Air 4D
- AUTOTERM Lower housing part for Air 2D
- AUTOTERM Upper housing part for Air 2D
- AUTOTERM Housing grille for Air 2D
- AUTOTERM Combustion chamber gasket for Air 2D
- AUTOTERM Combustion chamber screen for Air 2D
- AUTOTERM Glow plug bushing for Air 2D
- AUTOTERM Gasket for glow plug bushing – Air 2D
- AUTOTERM Mounting seal for Air 2D
- AUTOTERM Washer for temperature sensor – Air 2D, 4D, 8D
In case of heater faults, I help clarify the necessary spare part based on model, serial number, and symptoms. Parts with serial number restrictions are not included as general add-ons.
Service and repair of your heater
Is your existing diesel heater acting up? I also provide service, troubleshooting, and repair by appointment. Read about service and describe the problem with your heater →
Your selected configuration: 12 V / Standard / Without panel
| Model | AUTOTERM Air 2D |
|---|---|
| Heat output | 0.8–2.0 kW |
| Warm-air flow | 34–86 m³/hour |
| Electrical power consumption while running | 10–29 W. Starting requires additional power; follow the manual. |
| Fuel consumption | 0.10–0.24 litres/hour |
| Voltage | 12 V |
| Casing / kit | Standard |
| Controller | Without panel |
| Fuel | Diesel EN590 or HVO100 EN15940, according to the manufacturer. |
| Standard heater dimensions | 310 × 119 × 145 mm. Check the installation dimensions for the Tight Space kit separately. |
| Heater unit weight | 2.9 kg, excluding the installation kit. |
| Operating altitude | Up to 4,200 m with the manufacturer’s altitude-compensating control unit. |
Size the heater according to heat loss, insulation and air distribution. A particular length in feet or area in m² does not guarantee sufficient heating.
Check compatibility and limitations
Check model, voltage and variant before ordering.
Selected, documented parts for this heater model. Accessories are optional; spare parts are for servicing. Check the package contents before buying additional parts.
The accessories list is a selection of compatible options, not a complete installation list. Brackets and housings are different mounting options; buy only the solution that suits the installation. Always check the package contents. Spare parts are for servicing.
This product has both Standard and Tight Space variants. New housings and mounting boxes are not generally matched to all these variants; the housing version must be confirmed first.
Your selected configuration: 12 V / Standard / Mini Control
| Model | AUTOTERM Air 2D |
|---|---|
| Heat output | 0.8–2.0 kW |
| Warm-air flow | 34–86 m³/hour |
| Electrical power consumption while running | 10–29 W. Starting requires additional power; follow the manual. |
| Fuel consumption | 0.10–0.24 litres/hour |
| Voltage | 12 V |
| Casing / kit | Standard |
| Controller | Mini Control |
| Fuel | Diesel EN590 or HVO100 EN15940, according to the manufacturer. |
| Standard heater dimensions | 310 × 119 × 145 mm. Check the installation dimensions for the Tight Space kit separately. |
| Heater unit weight | 2.9 kg, excluding the installation kit. |
| Operating altitude | Up to 4,200 m with the manufacturer’s altitude-compensating control unit. |
Size the heater according to heat loss, insulation and air distribution. A particular length in feet or area in m² does not guarantee sufficient heating.
Check compatibility and limitations
Check model, voltage and variant before ordering.
Selected, documented parts for this heater model. Accessories are optional; spare parts are for servicing. Check the package contents before buying additional parts.
The accessories list is a selection of compatible options, not a complete installation list. Brackets and housings are different mounting options; buy only the solution that suits the installation. Always check the package contents. Spare parts are for servicing.
This product has both Standard and Tight Space variants. New housings and mounting boxes are not generally matched to all these variants; the housing version must be confirmed first.
Your selected configuration: 12 V / Standard / Comfort Control
| Model | AUTOTERM Air 2D |
|---|---|
| Heat output | 0.8–2.0 kW |
| Warm-air flow | 34–86 m³/hour |
| Electrical power consumption while running | 10–29 W. Starting requires additional power; follow the manual. |
| Fuel consumption | 0.10–0.24 litres/hour |
| Voltage | 12 V |
| Casing / kit | Standard |
| Controller | Comfort Control |
| Fuel | Diesel EN590 or HVO100 EN15940, according to the manufacturer. |
| Standard heater dimensions | 310 × 119 × 145 mm. Check the installation dimensions for the Tight Space kit separately. |
| Heater unit weight | 2.9 kg, excluding the installation kit. |
| Operating altitude | Up to 4,200 m with the manufacturer’s altitude-compensating control unit. |
Size the heater according to heat loss, insulation and air distribution. A particular length in feet or area in m² does not guarantee sufficient heating.
Check compatibility and limitations
Check model, voltage and variant before ordering.
Selected, documented parts for this heater model. Accessories are optional; spare parts are for servicing. Check the package contents before buying additional parts.
The accessories list is a selection of compatible options, not a complete installation list. Brackets and housings are different mounting options; buy only the solution that suits the installation. Always check the package contents. Spare parts are for servicing.
This product has both Standard and Tight Space variants. New housings and mounting boxes are not generally matched to all these variants; the housing version must be confirmed first.
Your selected configuration: 12 V / Standard / Touch Control
| Model | AUTOTERM Air 2D |
|---|---|
| Heat output | 0.8–2.0 kW |
| Warm-air flow | 34–86 m³/hour |
| Electrical power consumption while running | 10–29 W. Starting requires additional power; follow the manual. |
| Fuel consumption | 0.10–0.24 litres/hour |
| Voltage | 12 V |
| Casing / kit | Standard |
| Controller | Touch Control |
| Fuel | Diesel EN590 or HVO100 EN15940, according to the manufacturer. |
| Standard heater dimensions | 310 × 119 × 145 mm. Check the installation dimensions for the Tight Space kit separately. |
| Heater unit weight | 2.9 kg, excluding the installation kit. |
| Operating altitude | Up to 4,200 m with the manufacturer’s altitude-compensating control unit. |
Size the heater according to heat loss, insulation and air distribution. A particular length in feet or area in m² does not guarantee sufficient heating.
Check compatibility and limitations
Check model, voltage and variant before ordering.
Selected, documented parts for this heater model. Accessories are optional; spare parts are for servicing. Check the package contents before buying additional parts.
The accessories list is a selection of compatible options, not a complete installation list. Brackets and housings are different mounting options; buy only the solution that suits the installation. Always check the package contents. Spare parts are for servicing.
This product has both Standard and Tight Space variants. New housings and mounting boxes are not generally matched to all these variants; the housing version must be confirmed first.
Your selected configuration: 24 V / Standard / Without panel
| Model | AUTOTERM Air 2D |
|---|---|
| Heat output | 0.8–2.0 kW |
| Warm-air flow | 34–86 m³/hour |
| Electrical power consumption while running | 10–29 W. Starting requires additional power; follow the manual. |
| Fuel consumption | 0.10–0.24 litres/hour |
| Voltage | 24 V |
| Casing / kit | Standard |
| Controller | Without panel |
| Fuel | Diesel EN590 or HVO100 EN15940, according to the manufacturer. |
| Standard heater dimensions | 310 × 119 × 145 mm. Check the installation dimensions for the Tight Space kit separately. |
| Heater unit weight | 2.9 kg, excluding the installation kit. |
| Operating altitude | Up to 4,200 m with the manufacturer’s altitude-compensating control unit. |
Size the heater according to heat loss, insulation and air distribution. A particular length in feet or area in m² does not guarantee sufficient heating.
Check compatibility and limitations
Check model, voltage and variant before ordering.
Selected, documented parts for this heater model. Accessories are optional; spare parts are for servicing. Check the package contents before buying additional parts.
The accessories list is a selection of compatible options, not a complete installation list. Brackets and housings are different mounting options; buy only the solution that suits the installation. Always check the package contents. Spare parts are for servicing.
This product has both Standard and Tight Space variants. New housings and mounting boxes are not generally matched to all these variants; the housing version must be confirmed first.
Your selected configuration: 24 V / Standard / Mini Control
| Model | AUTOTERM Air 2D |
|---|---|
| Heat output | 0.8–2.0 kW |
| Warm-air flow | 34–86 m³/hour |
| Electrical power consumption while running | 10–29 W. Starting requires additional power; follow the manual. |
| Fuel consumption | 0.10–0.24 litres/hour |
| Voltage | 24 V |
| Casing / kit | Standard |
| Controller | Mini Control |
| Fuel | Diesel EN590 or HVO100 EN15940, according to the manufacturer. |
| Standard heater dimensions | 310 × 119 × 145 mm. Check the installation dimensions for the Tight Space kit separately. |
| Heater unit weight | 2.9 kg, excluding the installation kit. |
| Operating altitude | Up to 4,200 m with the manufacturer’s altitude-compensating control unit. |
Size the heater according to heat loss, insulation and air distribution. A particular length in feet or area in m² does not guarantee sufficient heating.
Check compatibility and limitations
Check model, voltage and variant before ordering.
Selected, documented parts for this heater model. Accessories are optional; spare parts are for servicing. Check the package contents before buying additional parts.
The accessories list is a selection of compatible options, not a complete installation list. Brackets and housings are different mounting options; buy only the solution that suits the installation. Always check the package contents. Spare parts are for servicing.
This product has both Standard and Tight Space variants. New housings and mounting boxes are not generally matched to all these variants; the housing version must be confirmed first.
Your selected configuration: 24 V / Standard / Comfort Control
| Model | AUTOTERM Air 2D |
|---|---|
| Heat output | 0.8–2.0 kW |
| Warm-air flow | 34–86 m³/hour |
| Electrical power consumption while running | 10–29 W. Starting requires additional power; follow the manual. |
| Fuel consumption | 0.10–0.24 litres/hour |
| Voltage | 24 V |
| Casing / kit | Standard |
| Controller | Comfort Control |
| Fuel | Diesel EN590 or HVO100 EN15940, according to the manufacturer. |
| Standard heater dimensions | 310 × 119 × 145 mm. Check the installation dimensions for the Tight Space kit separately. |
| Heater unit weight | 2.9 kg, excluding the installation kit. |
| Operating altitude | Up to 4,200 m with the manufacturer’s altitude-compensating control unit. |
Size the heater according to heat loss, insulation and air distribution. A particular length in feet or area in m² does not guarantee sufficient heating.
Check compatibility and limitations
Check model, voltage and variant before ordering.
Selected, documented parts for this heater model. Accessories are optional; spare parts are for servicing. Check the package contents before buying additional parts.
The accessories list is a selection of compatible options, not a complete installation list. Brackets and housings are different mounting options; buy only the solution that suits the installation. Always check the package contents. Spare parts are for servicing.
This product has both Standard and Tight Space variants. New housings and mounting boxes are not generally matched to all these variants; the housing version must be confirmed first.
Your selected configuration: 24 V / Standard / Touch Control
| Model | AUTOTERM Air 2D |
|---|---|
| Heat output | 0.8–2.0 kW |
| Warm-air flow | 34–86 m³/hour |
| Electrical power consumption while running | 10–29 W. Starting requires additional power; follow the manual. |
| Fuel consumption | 0.10–0.24 litres/hour |
| Voltage | 24 V |
| Casing / kit | Standard |
| Controller | Touch Control |
| Fuel | Diesel EN590 or HVO100 EN15940, according to the manufacturer. |
| Standard heater dimensions | 310 × 119 × 145 mm. Check the installation dimensions for the Tight Space kit separately. |
| Heater unit weight | 2.9 kg, excluding the installation kit. |
| Operating altitude | Up to 4,200 m with the manufacturer’s altitude-compensating control unit. |
Size the heater according to heat loss, insulation and air distribution. A particular length in feet or area in m² does not guarantee sufficient heating.
Check compatibility and limitations
Check model, voltage and variant before ordering.
Selected, documented parts for this heater model. Accessories are optional; spare parts are for servicing. Check the package contents before buying additional parts.
The accessories list is a selection of compatible options, not a complete installation list. Brackets and housings are different mounting options; buy only the solution that suits the installation. Always check the package contents. Spare parts are for servicing.
This product has both Standard and Tight Space variants. New housings and mounting boxes are not generally matched to all these variants; the housing version must be confirmed first.
Your selected configuration: 12 V / Tight Space / Without panel
| Model | AUTOTERM Air 2D |
|---|---|
| Heat output | 0.8–2.0 kW |
| Warm-air flow | 34–86 m³/hour |
| Electrical power consumption while running | 10–29 W. Starting requires additional power; follow the manual. |
| Fuel consumption | 0.10–0.24 litres/hour |
| Voltage | 12 V |
| Casing / kit | Tight Space |
| Controller | Without panel |
| Fuel | Diesel EN590 or HVO100 EN15940, according to the manufacturer. |
| Standard heater dimensions | 310 × 119 × 145 mm. Check the installation dimensions for the Tight Space kit separately. |
| Heater unit weight | 2.9 kg, excluding the installation kit. |
| Operating altitude | Up to 4,200 m with the manufacturer’s altitude-compensating control unit. |
Size the heater according to heat loss, insulation and air distribution. A particular length in feet or area in m² does not guarantee sufficient heating.
Check compatibility and limitations
Check model, voltage and variant before ordering.
Selected, documented parts for this heater model. Accessories are optional; spare parts are for servicing. Check the package contents before buying additional parts.
The accessories list is a selection of compatible options, not a complete installation list. Brackets and housings are different mounting options; buy only the solution that suits the installation. Always check the package contents. Spare parts are for servicing.
This product has both Standard and Tight Space variants. New housings and mounting boxes are not generally matched to all these variants; the housing version must be confirmed first.
Your selected configuration: 12 V / Tight Space / Mini Control
| Model | AUTOTERM Air 2D |
|---|---|
| Heat output | 0.8–2.0 kW |
| Warm-air flow | 34–86 m³/hour |
| Electrical power consumption while running | 10–29 W. Starting requires additional power; follow the manual. |
| Fuel consumption | 0.10–0.24 litres/hour |
| Voltage | 12 V |
| Casing / kit | Tight Space |
| Controller | Mini Control |
| Fuel | Diesel EN590 or HVO100 EN15940, according to the manufacturer. |
| Standard heater dimensions | 310 × 119 × 145 mm. Check the installation dimensions for the Tight Space kit separately. |
| Heater unit weight | 2.9 kg, excluding the installation kit. |
| Operating altitude | Up to 4,200 m with the manufacturer’s altitude-compensating control unit. |
Size the heater according to heat loss, insulation and air distribution. A particular length in feet or area in m² does not guarantee sufficient heating.
Check compatibility and limitations
Check model, voltage and variant before ordering.
Selected, documented parts for this heater model. Accessories are optional; spare parts are for servicing. Check the package contents before buying additional parts.
The accessories list is a selection of compatible options, not a complete installation list. Brackets and housings are different mounting options; buy only the solution that suits the installation. Always check the package contents. Spare parts are for servicing.
This product has both Standard and Tight Space variants. New housings and mounting boxes are not generally matched to all these variants; the housing version must be confirmed first.
Your selected configuration: 12 V / Tight Space / Comfort Control
| Model | AUTOTERM Air 2D |
|---|---|
| Heat output | 0.8–2.0 kW |
| Warm-air flow | 34–86 m³/hour |
| Electrical power consumption while running | 10–29 W. Starting requires additional power; follow the manual. |
| Fuel consumption | 0.10–0.24 litres/hour |
| Voltage | 12 V |
| Casing / kit | Tight Space |
| Controller | Comfort Control |
| Fuel | Diesel EN590 or HVO100 EN15940, according to the manufacturer. |
| Standard heater dimensions | 310 × 119 × 145 mm. Check the installation dimensions for the Tight Space kit separately. |
| Heater unit weight | 2.9 kg, excluding the installation kit. |
| Operating altitude | Up to 4,200 m with the manufacturer’s altitude-compensating control unit. |
Size the heater according to heat loss, insulation and air distribution. A particular length in feet or area in m² does not guarantee sufficient heating.
Check compatibility and limitations
Check model, voltage and variant before ordering.
Selected, documented parts for this heater model. Accessories are optional; spare parts are for servicing. Check the package contents before buying additional parts.
The accessories list is a selection of compatible options, not a complete installation list. Brackets and housings are different mounting options; buy only the solution that suits the installation. Always check the package contents. Spare parts are for servicing.
This product has both Standard and Tight Space variants. New housings and mounting boxes are not generally matched to all these variants; the housing version must be confirmed first.
Your selected configuration: 12 V / Tight Space / Touch Control
| Model | AUTOTERM Air 2D |
|---|---|
| Heat output | 0.8–2.0 kW |
| Warm-air flow | 34–86 m³/hour |
| Electrical power consumption while running | 10–29 W. Starting requires additional power; follow the manual. |
| Fuel consumption | 0.10–0.24 litres/hour |
| Voltage | 12 V |
| Casing / kit | Tight Space |
| Controller | Touch Control |
| Fuel | Diesel EN590 or HVO100 EN15940, according to the manufacturer. |
| Standard heater dimensions | 310 × 119 × 145 mm. Check the installation dimensions for the Tight Space kit separately. |
| Heater unit weight | 2.9 kg, excluding the installation kit. |
| Operating altitude | Up to 4,200 m with the manufacturer’s altitude-compensating control unit. |
Size the heater according to heat loss, insulation and air distribution. A particular length in feet or area in m² does not guarantee sufficient heating.
Check compatibility and limitations
Check model, voltage and variant before ordering.
Selected, documented parts for this heater model. Accessories are optional; spare parts are for servicing. Check the package contents before buying additional parts.
The accessories list is a selection of compatible options, not a complete installation list. Brackets and housings are different mounting options; buy only the solution that suits the installation. Always check the package contents. Spare parts are for servicing.
This product has both Standard and Tight Space variants. New housings and mounting boxes are not generally matched to all these variants; the housing version must be confirmed first.
Your selected configuration: 24 V / Tight Space / Without panel
| Model | AUTOTERM Air 2D |
|---|---|
| Heat output | 0.8–2.0 kW |
| Warm-air flow | 34–86 m³/hour |
| Electrical power consumption while running | 10–29 W. Starting requires additional power; follow the manual. |
| Fuel consumption | 0.10–0.24 litres/hour |
| Voltage | 24 V |
| Casing / kit | Tight Space |
| Controller | Without panel |
| Fuel | Diesel EN590 or HVO100 EN15940, according to the manufacturer. |
| Standard heater dimensions | 310 × 119 × 145 mm. Check the installation dimensions for the Tight Space kit separately. |
| Heater unit weight | 2.9 kg, excluding the installation kit. |
| Operating altitude | Up to 4,200 m with the manufacturer’s altitude-compensating control unit. |
Size the heater according to heat loss, insulation and air distribution. A particular length in feet or area in m² does not guarantee sufficient heating.
Check compatibility and limitations
Check model, voltage and variant before ordering.
Selected, documented parts for this heater model. Accessories are optional; spare parts are for servicing. Check the package contents before buying additional parts.
The accessories list is a selection of compatible options, not a complete installation list. Brackets and housings are different mounting options; buy only the solution that suits the installation. Always check the package contents. Spare parts are for servicing.
This product has both Standard and Tight Space variants. New housings and mounting boxes are not generally matched to all these variants; the housing version must be confirmed first.
Your selected configuration: 24 V / Tight Space / Mini Control
| Model | AUTOTERM Air 2D |
|---|---|
| Heat output | 0.8–2.0 kW |
| Warm-air flow | 34–86 m³/hour |
| Electrical power consumption while running | 10–29 W. Starting requires additional power; follow the manual. |
| Fuel consumption | 0.10–0.24 litres/hour |
| Voltage | 24 V |
| Casing / kit | Tight Space |
| Controller | Mini Control |
| Fuel | Diesel EN590 or HVO100 EN15940, according to the manufacturer. |
| Standard heater dimensions | 310 × 119 × 145 mm. Check the installation dimensions for the Tight Space kit separately. |
| Heater unit weight | 2.9 kg, excluding the installation kit. |
| Operating altitude | Up to 4,200 m with the manufacturer’s altitude-compensating control unit. |
Size the heater according to heat loss, insulation and air distribution. A particular length in feet or area in m² does not guarantee sufficient heating.
Check compatibility and limitations
Check model, voltage and variant before ordering.
Selected, documented parts for this heater model. Accessories are optional; spare parts are for servicing. Check the package contents before buying additional parts.
The accessories list is a selection of compatible options, not a complete installation list. Brackets and housings are different mounting options; buy only the solution that suits the installation. Always check the package contents. Spare parts are for servicing.
This product has both Standard and Tight Space variants. New housings and mounting boxes are not generally matched to all these variants; the housing version must be confirmed first.
Your selected configuration: 24 V / Tight Space / Comfort Control
| Model | AUTOTERM Air 2D |
|---|---|
| Heat output | 0.8–2.0 kW |
| Warm-air flow | 34–86 m³/hour |
| Electrical power consumption while running | 10–29 W. Starting requires additional power; follow the manual. |
| Fuel consumption | 0.10–0.24 litres/hour |
| Voltage | 24 V |
| Casing / kit | Tight Space |
| Controller | Comfort Control |
| Fuel | Diesel EN590 or HVO100 EN15940, according to the manufacturer. |
| Standard heater dimensions | 310 × 119 × 145 mm. Check the installation dimensions for the Tight Space kit separately. |
| Heater unit weight | 2.9 kg, excluding the installation kit. |
| Operating altitude | Up to 4,200 m with the manufacturer’s altitude-compensating control unit. |
Size the heater according to heat loss, insulation and air distribution. A particular length in feet or area in m² does not guarantee sufficient heating.
Check compatibility and limitations
Check model, voltage and variant before ordering.
Selected, documented parts for this heater model. Accessories are optional; spare parts are for servicing. Check the package contents before buying additional parts.
The accessories list is a selection of compatible options, not a complete installation list. Brackets and housings are different mounting options; buy only the solution that suits the installation. Always check the package contents. Spare parts are for servicing.
This product has both Standard and Tight Space variants. New housings and mounting boxes are not generally matched to all these variants; the housing version must be confirmed first.
Your selected configuration: 24 V / Tight Space / Touch Control
| Model | AUTOTERM Air 2D |
|---|---|
| Heat output | 0.8–2.0 kW |
| Warm-air flow | 34–86 m³/hour |
| Electrical power consumption while running | 10–29 W. Starting requires additional power; follow the manual. |
| Fuel consumption | 0.10–0.24 litres/hour |
| Voltage | 24 V |
| Casing / kit | Tight Space |
| Controller | Touch Control |
| Fuel | Diesel EN590 or HVO100 EN15940, according to the manufacturer. |
| Standard heater dimensions | 310 × 119 × 145 mm. Check the installation dimensions for the Tight Space kit separately. |
| Heater unit weight | 2.9 kg, excluding the installation kit. |
| Operating altitude | Up to 4,200 m with the manufacturer’s altitude-compensating control unit. |
Size the heater according to heat loss, insulation and air distribution. A particular length in feet or area in m² does not guarantee sufficient heating.
Check compatibility and limitations
Check model, voltage and variant before ordering.
Selected, documented parts for this heater model. Accessories are optional; spare parts are for servicing. Check the package contents before buying additional parts.
The accessories list is a selection of compatible options, not a complete installation list. Brackets and housings are different mounting options; buy only the solution that suits the installation. Always check the package contents. Spare parts are for servicing.
This product has both Standard and Tight Space variants. New housings and mounting boxes are not generally matched to all these variants; the housing version must be confirmed first.