Boat solar system 950Wh (2x 120Wp) MPPT
Item no. SS-10011
Solcellepakke med to 120 W-paneler og 20 A MPPT-regulator. De to paneler kan placeres forskellige steder på båden, så placering og skygger kan indgå i planlægningen.
- Paneler: 2 × 120 Wp – i alt 240 Wp
- Mål pr. panel: 915 × 676 × 25 mm
- Vægt pr. panel / samlet: Ca. 7,2 kg / 14,4 kg
Does this product suit your needs?
Wp er panelernes mærkeeffekt under standardiserede testforhold. Wh pr. døgn er energi over en dag og afhænger af årstid, skygger, panelretning og forbrug. Et oplyst sommerudbytte er derfor ikke en garanti for daglig produktion eller drift af alle apparater samtidig.
Ønsker du 230 V, skal du også have en passende inverter. Beregn dit døgnforbrug i strøm- og solcelleberegneren. Ved rælingsmontering skal både rørdiameter og panelbredde passe til beslaget.
What is included
- 2 × 120 Wp sorte paneler med 2 × 5 m kabel pr. panel.
- 20 A MPPT-regulator med display.
- 3 sæt MC4-stik og 1 sæt parallelstik.
- Ekstra 4 mm² solcellekabel: 5 m rød og 5 m sort.
- 3 m batterikabel, 2,5 mm², med 30 A sikring.
- Tilslutningsvejledning.
Technical details
| Paneler | 2 × 120 Wp – i alt 240 Wp |
|---|---|
| Mål pr. panel | 915 × 676 × 25 mm |
| Vægt pr. panel / samlet | Ca. 7,2 kg / 14,4 kg |
| Vmp / Voc pr. panel | 17,6 V / 20,9 V |
| Vejledende produktion | Ca. 950 Wh/døgn i solrigt sommervejr |
| MPPT-regulator | 20 A med display, 12/24 V |
| Batterityper | Bly, AGM, GEL og LiFePO4 med korrekt ladeprofil |
| Regulatormål | 175 × 145 × 50 mm |
| Regulatorbeskyttelse | IP30 – tør indendørs placering |
Installation and choosing accessories
Batteri og monteringsbeslag købes separat. Vælg regulatorens ladeprofil efter batteriet. Regulatoren monteres tørt og ventileret. Kabeltværsnit og sikring skal kontrolleres til den samlede længde, belastning og monteringsmåde; en medfølgende kabelpakke er ikke en universel dimensioneringsanvisning.
De medfølgende parallelstik er relevante til en 12 V-opsætning. Ved 24 V skal panelerne normalt seriekobles, så spændingen er høj nok. Følg regulatorens tilslutningsvejledning.
Full product description
Solar panel kit with two 120 W panels and a 20 A MPPT controller. The two panels can be placed in different locations on the boat, allowing for flexible positioning and shading considerations during planning.
Technical specifications and dimensions
| Panels | 2 × 120 Wp – total 240 Wp |
|---|---|
| Dimensions per panel | 915 × 676 × 25 mm |
| Weight per panel / total | Approx. 7.2 kg / 14.4 kg |
| Vmp / Voc per panel | 17.6 V / 20.9 V |
| Indicative production | Approx. 950 Wh/day in sunny summer weather |
| MPPT controller | 20 A with display, 12/24 V |
| Battery types | Lead-acid, AGM, GEL and LiFePO4 with correct charging profile |
| Controller dimensions | 175 × 145 × 50 mm |
| Controller protection | IP30 – dry indoor installation |
What's included
- 2 × 120 Wp black panels with 2 × 5 m cable per panel.
- 20 A MPPT controller with display.
- 3 sets of MC4 connectors and 1 set of parallel connectors.
- Extra 4 mm² solar cable: 5 m red and 5 m black.
- 3 m battery cable, 2.5 mm², with 30 A fuse.
- Connection guide.
Compatibility and installation
Battery and mounting brackets are sold separately. Select the controller's charging profile according to your battery type. The controller must be installed in a dry and ventilated area. Cable cross-section and fuse rating must be checked against the total cable run, load, and installation method; an included cable package is not a universal sizing guide.
The included parallel connectors are relevant for a 12 V setup. For 24 V, the panels must normally be connected in series to ensure the voltage is high enough. Follow the controller's connection guide.
Good to know before buying
Wp is the rated power of the panels under standardized test conditions. Wh per day is the energy over a 24-hour period and depends on the season, shadows, panel orientation, and consumption. Stated summer yield is therefore not a guarantee for daily production or the operation of all appliances simultaneously.
If you require 230 V, you will also need a suitable inverter. Calculate your daily consumption in the power and solar calculator. For rail mounting, both the pipe diameter and panel width must match the bracket.