Transducer extension cable, 9 m (8-pin)

Your selected configuration: Standard

Kontrollér ledertværsnit, længde, spændingsfald og stikforbindelser. En kabeltype er ikke automatisk egnet til alle marineinstallationer.

Installation og kompatibilitet

Kontrollér transducertype, stik, frekvens, effekt, skrogmateriale, deadrise og monteringsform. Placeringen skal give transduceren så rent vandflow som muligt og passe til den kompatible Garmin-enhed.

💡 Mit råd før bestilling

Jeg anbefaler, at model, strøm, stik og monteringsforhold bliver kontrolleret, før Transducerforlængerkabel, 9 m (8-pin) bestilles. Du er velkommen til at sende billeder og modelnumre, så hjælper jeg med vurderingen.

Transducer extension cable, 9 m (8-pin) – developed for life on board

With the Transducer extension cable, 9 m (8-pin), you get echo sounder or transducer equipment for displaying depth, bottom, fish, and structure under the boat. It is an obvious choice when the equipment needs to function as a well-thought-out part of the boat's overall installation, and you want control over compatibility, mounting, and practical use on board.

⚡ Practical benefits

• Extend the cable length of your compatible transducer with this 3 m (10 ft) or 9 m (30 ft) cable.
• Provides a better overview of depth, bottom conditions, and fish.
• Should be chosen based on compatible plotter, connector type, and mounting method.
• Can provide a more detailed image of bottom conditions and underwater objects depending on the chosen technology.
• Can be part of a compatible Garmin sonar system together with a plotter or black box.
• The correct choice depends on connector type, frequency, power, hull, and the desired mounting method.

⛵ Suitable for

• Fishing, depth measurement, and better understanding of bottom conditions
• New Garmin sonar installations and upgrades
• Boat owners who want help with transducer, frequency, connector, and mounting

📊 Specifications

📦 Box contents

• Scope of delivery may vary between models and variants. Check the official documentation for the specific variant before ordering.

🔧 Installation and compatibility

Check transducer type, connector, frequency, power, hull material, deadrise, and mounting method. The location must provide the transducer with as clean water flow as possible and suit the compatible Garmin device.

📄 Manuals and documentation

• Open official manuals, installation instructions, and safety information at Fusion/Garmin Support

💡 My advice before ordering

I recommend that model, power, connector, and mounting conditions are checked before ordering the Transducer extension cable, 9 m (8-pin). You are welcome to send photos and model numbers, and I will help with the assessment.