200W 12V Solar Panel – Black Monocrystalline

Match panelet med regulator og batteri. Opgiven effekt er en testværdi; skygge, varme og montering påvirker ydelsen.

Vigtigt om laderegulator

Dette er et højvoltspanel og må ikke tilsluttes direkte til et 12 V eller 24 V batteri.

Ved batteridrift skal panelet forbindes gennem en MPPT-laderegulator, som kan håndtere panelets tomgangsspænding på 46,2 V. Laderegulatoren skal samtidig dimensioneres efter batterispændingen og den samlede solcelleeffekt.

Skal panelet erstatte et eksisterende panel, bør både mål, spænding, strøm, stik og laderegulator kontrolleres inden bestilling.

Montering sammen med ældre paneler

Panelet er 35 mm tykt. Skal det monteres sammen med eksisterende paneler med en 40 mm ramme, kan det normalt hæves cirka 5 mm, så panelernes overkant kommer til at flugte.

Ved parallel- eller serieforbindelse med eksisterende paneler skal panelernes elektriske specifikationer passe sammen. Kontakt gerne SejlStrøm, hvis du er i tvivl om kompatibiliteten.

200 W monocrystalline solar panel – black frame – 36 V

Powerful 200 W solar panel in an elegant black design for boats, motorhomes, caravans, holiday homes, and other off-grid installations.

The panel is built with 72 monocrystalline solar cells and delivers a working voltage of 38.5 V. The high panel voltage makes it suitable for efficient charging of both 12 V and 24 V battery systems via a suitable MPPT charge controller.

The panel can also be used as a replacement for older 200 W panels from approximately 2011–2014, where the relatively compact size of 1580 × 808 mm was often used.

⚡ Benefits

• 200 W nominal power

• Monocrystalline class A solar cells

• Positive power tolerance up to +5 W

• Black frame, black cells, and black backing

• Three bypass diodes that reduce losses during partial shading

• Robust aluminum frame

• Tempered solar glass

• Supplied with MC4 connectors

• Long performance warranty

⛵ Suitable for

• Boats with space for a fixed solar panel

• Motorhomes and caravans

• Holiday homes and allotment gardens

• Off-grid battery systems

• Replacing older panels with similar dimensions

• 12 V and 24 V battery systems with MPPT charge controller

Technical specifications

• Maximum power: 200 W

• Number of cells: 72

• Cell type: Monocrystalline

• Voltage at maximum power: 38.5 V

• Current at maximum power: 5.2 A

• Open-circuit voltage: 46.2 V

• Short-circuit current: 5.7 A

• Power tolerance: 0 to +5 W

• Dimensions: 1580 × 808 × 35 mm

• Weight: Approx. 15.5 kg

• Connection cables: 2 × 80 cm, 2.5 mm²

• Connector type: MC4

• Frame: Black aluminum

• Surface: Tempered solar glass

• Performance warranty: Minimum 90% after 10 years and 80% after 25 years

Important information regarding charge controllers

This is a high-voltage panel and must not be connected directly to a 12 V or 24 V battery.

For battery operation, the panel must be connected through an MPPT charge controller that can handle the panel's open-circuit voltage of 46.2 V. The charge controller must also be sized according to the battery voltage and total solar power.

If the panel is to replace an existing one, check the dimensions, voltage, current, connectors, and charge controller before ordering.

Installation with older panels

The panel is 35 mm thick. If it is to be installed alongside existing panels with a 40 mm frame, it can usually be raised by approximately 5 mm so that the top edges of the panels align.

When connecting in parallel or series with existing panels, the electrical specifications of the panels must be compatible. Please contact SejlStrøm if you are in doubt about compatibility.