AUTOTERM Baltica Basic 12 V

Your selected configuration: 12 V

Bådlængde alene afgør ikke størrelsen. Følg manualen for brændstof, strøm, forbrændingsluft og gastæt udstødning til det fri.

Installation og kompatibilitet

Baltica Basic er kun kompatibel med den særlige Baltica-version af Flow 5 – ikke en almindelig Flow 5. Beholderen monteres lodret med mindst 5 cm frihøjde, og rørstrækningen mellem varmer og beholder må højst være 3 m. Brug kun egnet propylenglykol i systemer med brugsvandsvarmeveksler.

💡 Mit råd før bestilling

Jeg anbefaler, at vi gennemgår hele bådens varmekredsløb før bestilling. Send en skitse med motor, konvektorer, boiler og montagehøjder, så hjælper jeg med at kontrollere komponenter og rørføring.

AUTOTERM Baltica Basic – integrated hydronic heating and hot water for the boat

Baltica Basic is the core of an advanced marine heating system with a vertical 13-litre expansion tank and internal heat exchanger for domestic hot water. The system is developed for boats where comfort, operational reliability, and a tidy installation are important.

⚡ Practical advantages

• 13 l expansion tank with internal heat exchanger
• Approx. 6–10 l of domestic hot water depending on temperatures and flow
• Two 800 W electric heating elements for 240 V AC
• Can integrate cabin heating, engine preheating, and domestic hot water

⛵ Suitable for

• Sailboats and motorboats with hydronic heating
• Year-round use and extended stays on board
• New installations where the entire hydronic circuit is sized as a whole

📊 Specifications

📦 Package contents

Baltica Basic unit, expansion tank, overflow pipe, electrical cable, and official manual. The custom-adapted Baltica Flow 5 heater and Baltica Control are purchased separately.

🔧 Installation and compatibility

Baltica Basic is only compatible with the special Baltica version of the Flow 5 – not a standard Flow 5. The tank must be mounted vertically with at least 5 cm of clearance, and the pipe run between the heater and the tank must not exceed 3 m. Only use suitable propylene glycol in systems with a domestic hot water heat exchanger.

📄 Manuals and documentation

• Official product information
• Official manual or document 1

💡 My advice before ordering

I recommend that we review the boat's entire heating circuit before ordering. Send a sketch showing the engine, convectors, boiler, and mounting heights, and I will help check the components and piping.