APK™ 10 autopilot keypad, horizontal

Your selected configuration: Standard

Kontrollér dækningsomfanget i pakken og kompatibilitet mellem sensor, kontrolenhed og drev. Autopiloten kræver stadig aktivt udkig.

Installation og kompatibilitet

Kontrollér styresystem, cylindervolumen eller drevtype, spænding, pumpe/aktuator, NMEA 2000 og kompatibel betjening. En autopilot skal dimensioneres efter den konkrete båd og efterfølgende kalibreres korrekt.

💡 Mit råd før bestilling

Jeg anbefaler, at model, strøm, stik og monteringsforhold bliver kontrolleret, før APK™ 10 autopilottastatur, Horisontal bestilles. Du er velkommen til at sende billeder og modelnumre, så hjælper jeg med vurderingen.

APK™ 10 Autopilot Keypad, Horizontal – designed for life on board

With the APK™ 10 Autopilot Keypad, Horizontal, you get autopilot equipment for more stable heading control and less strain during long passages. It is an obvious choice when you want the equipment to function as a well-integrated part of the boat’s overall installation, and you want to ensure compatibility, proper mounting, and practical use on board.

⚡ Practical benefits

• Connect to your NMEA® 2000 network with a single port and cable for integration and power.
• A low-profile design matches the height of your GHC 50 instrument and GPSMAP® chartplotter. The APK 10 keypad accessory is available in horizontal and vertical mounting options to suit your new or existing helm station.
• Reactor 40 hydraulic autopilot
• Can relieve the helmsman and hold a steady course when the system is correctly sized and calibrated.
• Can be integrated with compatible Garmin chartplotters and instruments.
• Should be selected based on the boat’s steering system, size, and the pump or actuator that will control the rudder.

⛵ Suitable for

• Longer trips where stable course control provides more comfort
• Hydraulic, mechanical, or steer-by-wire systems depending on the model
• Boat owners who want assistance with the corepack, pump, display, and compatibility

📊 Specifications

📦 In the box

• Backbone/drop cable (2 m) and T-connector for NMEA 2000® network

🔧 Installation and compatibility

Verify your steering system, cylinder volume or drive type, voltage, pump/actuator, NMEA 2000, and compatible control. An autopilot must be sized for the specific boat and subsequently calibrated correctly.

📄 Manuals and documentation

• Open official manuals, installation guides, and safety information at Fusion/Garmin Support

💡 My advice before ordering

I recommend checking the model, power, connectors, and mounting conditions before ordering the APK™ 10 Autopilot Keypad, Horizontal. You are welcome to send photos and model numbers, and I will be happy to assist with the assessment.