VEVOR IP68 Marine Battery Charger – 3 Banks x 10 A / 12 V

Kontrollér indgang, batteritype, ladeprofil og belastning. Udgange og installationskrav varierer mellem modeller.

VEVOR IP68 marinebatterilader – 3 banke á 10 A / 12 V – til fast opladning af batterier ombord

Med VEVOR IP68 marinebatterilader – 3 banke á 10 A / 12 V får du en fastmonteret 120–240 V AC-lader med 3 uafhængige udgange til 12 V-batterier. Hver udgang leverer op til 10 A og kan indstilles til LFP, NCM eller bly/syre.

Installation og kompatibilitet

Kontrollér EU-stik og tilslutningsform før bestilling. Fast 230 V installation ombord skal udføres efter gældende regler med korrekt landstrømsbeskyttelse, jord, sikring og fejlstrømsafbryder. Vælg batteriprogram for hver banks kemi, og placér kabler og samlinger, så de er beskyttet mod vand og mekanisk belastning.

💡 Mit råd før bestilling

Vælg kun 3-bank-modellen, hvis alle 3 banker er 12 V og kan bruge en ladeprofil, som laderen understøtter. Du er velkommen til at sende billeder og modelnumre, så hjælper jeg med vurderingen.

VEVOR IP68 Marine Battery Charger – 3 banks of 10 A / 12 V – for fixed onboard battery charging

With the VEVOR IP68 Marine Battery Charger – 3 banks of 10 A / 12 V, you get a permanently mounted 120–240 V AC charger with 3 independent outputs for 12 V batteries. Each output delivers up to 10 A and can be set for LFP, NCM, or lead-acid batteries.

⚡ Practical Benefits

• 3 independent 10 A outputs for separate 12 V batteries.
• IP68-rated housing, resistant to water, dust, and salt exposure.
• Multi-stage charging for LFP, NCM, and lead-acid.
• According to the manufacturer, can start charging from 0 V on deeply discharged batteries.
• Protection against overvoltage, overcurrent, short circuit, sparks, overheating, and reverse polarity.

⛵ Suitable for

• Boats with separate starter and service batteries
• Fixed shore power charging in boats or campers
• 3 battery banks that need to be charged individually

📊 Specifications

📦 Package contents

• 1 marine battery charger
• AC cable, specified length 1.75 m
• DC cable(s), specified length 1.75 m
• Product documentation

🔧 Installation and compatibility

Check the EU plug and connection type before ordering. Fixed 230 V installation onboard must be performed according to current regulations with proper shore power protection, grounding, fusing, and RCD. Select the battery program for each bank's chemistry, and place cables and connections so they are protected from water and mechanical stress.

📄 Manuals and documentation

• Open official product page and available documentation at VEVOR

💡 My advice before ordering

Only choose the 3-bank model if all 3 banks are 12 V and can use a charging profile supported by the charger. You are welcome to send photos and model numbers, and I will help with the assessment.