Whale SI8284 Bilge IC Remote Mounted Bilge System 12V
Item no. WHA-10202
DescriptionBILGE IC (IC Intelligent Control™) Pre-wired Easy Access remote-mounted bilge system (4 in 1) with built-in intelligent automatic control. Save time and money by reducing four separate components to one pre-wired system. The remote-mounted automatic Gulper IC receives signals from the Strainer IC and switches on and off automatically. WHY Bilge IC? Features and benefits: Wired and assembled - just connect power Remote-mounted pump for...
Technical details
Your selected configuration: Standard
Contact me with the item number if you need more technical information about this product.
Full product description
Description
BILGE IC (IC Intelligent Control™)
Pre-wired Easy Access remote-mounted bilge system (4 in 1) with built-in intelligent automatic control.
Save time and money by reducing four separate components to one pre-wired system. The remote-mounted automatic Gulper IC receives signals from the Strainer IC and switches on and off automatically.
WHY Bilge IC?
Features and benefits:
Wired and assembled - just connect power
Remote-mounted pump for easy inspection
Soft start - protects the pump for a long service life
Small strainer fits into very tight spaces
Low-current controlled switching - no switch failure
On/off delay
Environmentally friendly - no mercury
Time delay to ensure optimal drainage
Wiring to allow for manual activation
Drains down to 6 mm (1/4")
Certification:
Complies with ISO 8849 and ISO 15083
Ignition protected according to ABYC and USCG standards
CE certified
EMC compliant
NMMA type accepted
Tip: It is important to ensure that a vented anti-siphon loop is incorporated into the system.
Flow Rate Description
1140LPH (301 US GPH) / 19LPM (5 US GPM)
Material
Glass-Filled Nylon Pump Head, Santoprene Valves & Diaphragm
Automatic Bilge Pumps
Yes
Maximum Pump Head
2.3 to 4.27 Metres
Hose Size
19mm / 3/4", 25mm / 1"
Maximum Combined Head and Lift
4 Metres (12 Feet)
Maximum Recommended Head
3 Metres (10 Feet)
Self Primes up to
3 Metres (9.8 Feet)
Wire Size
Minimum 1.5mm² (16 AWG)
Inlet Outlet
Fittings to Suit 19mm (3/4") & 25mm (1") ID Hose. Strainer Suits 19mm (3/4") ID Hose
Brand
Whale
Model
SI8222B
Voltage Description
12V DC
Amps Description
Up to 8A (standby current draw: 0.01A)
Fuse
10A
Height Description
120mm (4.7")
Width
198mm
Length
280mm, Cable: 2 Metres (6ft)
Country of Origin
United Kingdom
Your selected configuration: Standard
Contact me with the item number if you need more technical information about this product.