Victron MPPT Control – external display for BlueSolar and SmartSolar

Kontrollér panelets tomgangsspænding i kulde, maksimal indgangsstrøm og batteriets krav. MPPT-betegnelsens tal er ikke panelets effekt i watt.

Passer til – og kræver

Displayet forbindes til én kompatibel MPPT-regulator via VE.Direct. VE.Direct-kablet medfølger ikke og vælges efter den faktiske føringsvej. Kabelforbindelsen må højst være 10 meter og må ikke forlænges. Et separat strømforsyningskabel med sikring følger med displayet; det bruges kun ved visse meget gamle regulatorer, som ikke kan forsyne displayet via dataforbindelsen.

Dette er ikke SmartSolar plug-in-displayet. Det runde MPPT Control placeres separat fra regulatoren og bruger dens VE.Direct-port. Et USB-interface eller en Bluetooth-dongle kan ikke samtidigt benytte den samme port.

Montering

Displayet er beregnet til indbygning i et panel. Til påbygget montering kan du tilkøbe vægkabinettet til MPPT Control/BMV. Kabinet, regulator og VE.Direct-kabel er ikke inkluderet med displayet.

Victron MPPT Control is a separate display for BlueSolar and SmartSolar MPPT charge controllers with VE.Direct. It is a solution for those who want to view solar charging at their control station, even if the controller is mounted in a technical room or under a bench.

What you can view and adjust

• Current solar power, as well as solar voltage and current data.
• Battery voltage, charge current, and current charge stage.
• History for up to 30 days, as well as total historical values.
• Controller settings. Data regarding the load output is only available on controllers that have this function.

Fits – and requires

The display connects to one compatible MPPT controller via VE.Direct. The VE.Direct cable is not included and should be selected based on the actual routing path. The cable connection must not exceed 10 meters and must not be extended. A separate power supply cable with a fuse is included with the display; it is only used for certain very old controllers that cannot power the display via the data connection.

This is not the SmartSolar plug-in display. The round MPPT Control is placed separately from the controller and uses its VE.Direct port. A USB interface or a Bluetooth dongle cannot use the same port simultaneously.

Choose one VE.Direct cable

• 0.3 m – straight connector
• 0.9 m – straight connector
• 1.8 m – straight connector
• 3 m – straight connector
• 5 m – straight connector
• 10 m – straight connector
• 0.3 m – right-angle connector on one end
• 0.9 m – right-angle connector on one end
• 1.8 m – right-angle connector on one end
• 3 m – right-angle connector on one end
• 5 m – right-angle connector on one end
• 10 m – right-angle connector on one end

Mounting

The display is designed for flush mounting in a panel. For surface mounting, you can purchase the wall-mount enclosure for MPPT Control/BMV. Enclosure, controller, and VE.Direct cable are not included with the display.

Controlled controllers in the range

The list shows the active controller products checked in this overview. Other model variants must be evaluated based on their connectivity and manual.

• BlueSolar MPPT 100/15
• BlueSolar MPPT 100/20
• BlueSolar MPPT 100/30
• BlueSolar MPPT 100/50
• BlueSolar MPPT 150/35
• BlueSolar MPPT 150/45
• BlueSolar MPPT 150/60 MC4
• BlueSolar MPPT 150/70 MC4
• BlueSolar MPPT 150/70 Tr
• BlueSolar MPPT 150/100 Tr VE.Can
• SmartSolar MPPT 75/10
• SmartSolar MPPT 75/15
• SmartSolar MPPT 100/20
• SmartSolar MPPT 100/30
• SmartSolar MPPT 100/50
• SmartSolar MPPT 150/35
• SmartSolar MPPT 150/45
• SmartSolar MPPT 150/60 MC4
• SmartSolar MPPT 150/70 MC4 VE.Can
• SmartSolar MPPT 150/70 Tr
• SmartSolar MPPT 150/70 Tr VE.Can
• SmartSolar MPPT 150/85 MC4 VE.Can
• SmartSolar MPPT 150/85 Tr VE.Can
• SmartSolar MPPT 150/100 MC4 VE.Can
• SmartSolar MPPT 150/100 Tr VE.Can
• SmartSolar MPPT 250/60 MC4
• SmartSolar MPPT 250/100 Tr VE.Can

Manual and documentation

• MPPT Control – manual
• Connection, cable limit, and power supply